Wiegand Front End Mode: In Wiegand Front End mode, a separate Wiegand Access Control panel is required. The 2000e/eM keypads were evaluated by UL, in Secured Series Front End mode, for use only with the Hub Max II and Hub MiniMax II products. The locking device and all inputs and outputs are connected to the controller. The Secured Series Controller maintains the users and programming options and makes all the access control decisions. Secured Series Front End Mode: In Secured Series Front End mode, a Secured Series Controller is required. The lock and all other inputs and outputs are connected directly to the keypad. In this mode, all the users and other programming options are maintained within the keypad and no additional controller is required. Standalone Mode: By default, the keypad is programmed for Standalone Mode. Refer to the programming section for details about selecting each mode. Below is a brief explanation of each mode. If the keypad still does not work after troubleshooting, please call the Technical Services department at Keypad Operating Modes The 2000e/2000eM keypad has three operating modes: Standalone Mode, Secured Series Front End Mode and Wiegand Front End Mode. 22 AWG 1.0x ( 1 is the major version 0 is the minor version x is a minor version, reserved for bug fi xes, which is indicated with a letter, such as a.) Technical Support DEALERS/INSTALLERS ONLY! End users must contact the dealer/installer for support. 30VDC (Main & Aux) Normally Open Dry Contact Normally Closed Dry Contact 4.50 H x 2.75 W x 0.60 D Indoor or Outdoor -31 F to 151 F (-35✬ to 66 C) Stranded and Shielded 1000 Ft. Specifications Parameter Voltage Requirements Keypad Current Requirements (Max) Keypad with Output Expansion Module (2000-8EX) Current Requirements (Max) Relay Contact Rating REX Input Door Position Switch Input Mechanical Dimensions Environment Temperature Tolerance Front End Cable Type Front End Distance and Wire Gauge Firmware Version Specifications VDC VAC VDC VAC 10V: 85mA 12V: 150mA 30V: 115mA 24V: 200mA VDC VAC 10V: 230mA 12V: 500mA 30V: 390mA 24V: 700mA Note: This is total maximum current including keypad and output module. This warranty shall expire two years after shipping date for DOOR-GARD keypads.Įxcept as stated above, IEI makes no warranties, either express or implied, as to any matter whatsoever, including, without limitation to, the condition of its products, their merchantability, or fitness for any particular purpose.1 2000e & 2000eM Keypad Installation & Programming Instructions Note: This product is designed to be installed and serviced by security and lock industry professionals. IEI will not be liable to the purchaser or anyone else for incidental or consequential damages arising from any defect in, or malfunction of, its products. IEI’s sole liability is limited to the repair or (at IEI’s option) the replacement of the defective product or part when sent to IEI’s facility (freight and insurance charges prepaid), after first obtaining IEI’s Return Merchandise Authorization. IEI does not assume any responsibility for damage or injury to person or property due to improper care, storage, handling, abuse, misuse, normal wear and tear, or an act of God. (IEI) warrants its products to be free from defects in material and workmanship, when they have been installed in accordance with the manufacturer’s instructions, and have not been modified or tampered with. On SE keypad, holes have also been spotted inside the front housing for additional LEDs (LEDs not included).To speed installation of the SE keypad, holes have been spotted on the inside the back housing for mounting to a wall or a single-gang electrical box. ![]() ![]() For use in extreme weather conditions, consult the factory for additional methods of protecting your keypad. ![]() ![]() This allows air to circulate and a place for condensation to drain.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |